Err

ENQUIRIES 01289 466101
Need help measuring? Text any photos to 07368126240
quality drawers made for any space
HOW TO ASSEMBLE - INTERNAL BLUM TANDEMBOX - Shallow
This page shows the quickest and easiest way to assemble your drawer box.
A video of each procedure is also available on the product page.

How to assemble inner shallowblum tandembox Antaro drawer Tools and materials required.
  • Cordless drill driver or equivalent
  • Phillips screwdriver
  • Set square or straight edge
  • Tape measure
  • Pencil
  • Supports, or a box that is taller than the drawer sides
How to assemble inner shallowblum tandembox Antaro drawer
  • Complete internal drawer kit
  • Please Note - Back Brackets are now sent loose to prevent damage in transit
    The section below shows how to attach the back bracket to the drawer side.
    There will be 1 x left hand bracket and 1 x right hand bracket for each drawer.

  • Line up the back bracket as shown in the image and push firmly down.
    You will hear a click as the bracket locks into place.
  • The brackets are made left and right sided, and can only go on one way on the correct drawer side.
How to assemble inner shallowblum tandembox Antaro drawer
  • Lay the drawer base on top of the cardboard box or packer
  • Put the drawer side in position and line up the end with the front of the base as shown
  • Hold in position and put the screws in to secure the drawer side


How to assemble inner shallowblum tandembox Antaro drawer
  • Repeat for the other side
How to assemble inner shallowblum tandembox Antaro drawer
  • Turn the box over and slide the back panel into position
  • Attach the back panel with the 4 x 15mm screws supplied
How to assemble inner shallowblum tandembox Antaro drawer
  • Line up the fixing brackets on the drawer front with the drawer side
  • Click the drawer front into place
How to assemble inner shallowblum tandembox Antaro drawer